|
Post by Bruce on Nov 14, 2018 4:30:52 GMT
If you use the router mount from MillRight there is a slot in the front with a screw to hold something like this pin in place.
|
|
|
Post by jamesterm on Nov 14, 2018 17:37:41 GMT
That is a pretty cool looking system! Does the Dewalt used on the Carve King accept a 1/2" collet because that is what that system looks like it needs? I made something alternatively that can work here is a pic of it: The part can be found here bundled within this controller box: (-link-)
|
|