|
|
Post by ricko on Apr 13, 2019 20:41:39 GMT
Cut out of 1" black walnut laminated to 1/4 hard maple Roughed with 1/4" EM Pocketed maple area only with 1/8 downcut EM , 1mm into maple Finished frame and face with 1/8" tappered ball mill V carved name on frame with 60 deg 2 flute v bit Profiled with 1/8" downcut EM Finished in satin www.mountainartgifts.com  Attachment Deleted |
|
|
|
Post by Bruce on Apr 14, 2019 3:27:35 GMT
Really nice work. Great idea laminating the walnut and maple together and then mill the relief and frame.
|
|
|
|
Post by Derek the Admin on Apr 14, 2019 18:22:08 GMT
Nice work ricko. Very detailed stuff.
|
|
|
|
Post by Hommer Woods on May 12, 2019 21:48:33 GMT
ricko you have inspired me. I have done some work with layered wood but had not done any 3D carving. Have tried it with a Maple/Walnut piece. Turned out pretty good. Now working on some other designs. |
|
|
|
Post by Derek the Admin on May 13, 2019 0:18:48 GMT
Awesome work Hommer.
|
|
|
|
Post by Bruce on May 13, 2019 0:36:47 GMT
Very nice work Stephen, I like to see how ideas are taken and adapted from one person to the next.
|
|
|
|
Post by Hommer Woods on May 15, 2019 21:46:26 GMT
|
|
|
|
Post by Bruce on May 16, 2019 1:26:28 GMT
Great work Stephen, What kind of wood is Pic 3 made from?
|
|
|
|
Post by Hommer Woods on May 16, 2019 1:42:03 GMT
Great work Stephen, What kind of wood is Pic 3 made from? It's purpleheart over Aspen. |
|
|
|
Post by ricko on May 18, 2019 20:12:28 GMT
Beautiful work Stephen, you are the box king
|
|
Attachment Deleted
