rja
New Member
Posts: 1
|
Post by rja on May 6, 2019 14:20:43 GMT
I just bought my carve king and started putting everything together. I got to the z plate, everything squared up and the bracket that holds the router put into place but when I mount the top plate that has the stepper motor on it, the threaded rod hits the coupler.. the threaded rod splits the hole of the coupler. I have taken it apart several times, to verify what’s not aligning up. What sounds to be out of alignment? thanks
|
|
gogogad
New Member
Posts: 44
Machine: Carve King
|
Post by gogogad on May 6, 2019 17:03:36 GMT
Happen to have pictures? I could compare it to mine with those.
|
|
|
Post by Derek the Admin on May 6, 2019 21:30:24 GMT
Do you have the nut block spacer between the Z plate and the antibacklash nut? I think that may solve it for you.
|
|