|
Post by Bruce on Aug 16, 2019 1:40:36 GMT
I think there is a Shapeoko post processor in CamBam and it should work since that machine is GRBL based.
|
|
|
Post by Derek the Admin on Aug 16, 2019 2:59:28 GMT
Bruce is correct I think.
|
|
|
Post by Bruce on Aug 17, 2019 17:44:07 GMT
I suppose you should try the generic G-Code post processor. If that doesn't work, you will have to ask the CamBam support how to use a post processor for Arduino/GRBL machines.
|
|