Post by skirblah on Sept 20, 2019 17:37:00 GMT
I’m new to both cnc and this forum. I’m really glad my research led me to MillRight. I have an M3, and it’s been running great, with a few learning curve lessons along the way.
I’m in production mode on my first project, a wine glass holder that rests on the bottle. Prototyped it in mdf, cut a few pine ones, then 16 poplar, now running through 40 oak ones. Oak has been a lesson ... be sure to slow the feed rate down compared to the other woods.
Anyway...
My thanks and kudos to Derek for his awesome products and customer service, and to y’all for sharing your experience and knowledge on this forum. It’s greatly appreciated.
I’m in production mode on my first project, a wine glass holder that rests on the bottle. Prototyped it in mdf, cut a few pine ones, then 16 poplar, now running through 40 oak ones. Oak has been a lesson ... be sure to slow the feed rate down compared to the other woods.
Anyway...
My thanks and kudos to Derek for his awesome products and customer service, and to y’all for sharing your experience and knowledge on this forum. It’s greatly appreciated.
