gemmi8
Junior Member
Posts: 87
|
Post by gemmi8 on Feb 6, 2020 17:28:10 GMT
Question.....I've tried searching but no luck. I am attempting to carve my own branding iron on a piece of brass. Hasn't gone as I would have hoped. Can someone recommend some good bits to crave brass or aluminum.
Thanks!
|
|
gemmi8
Junior Member
Posts: 87
|
Post by gemmi8 on Feb 6, 2020 17:30:23 GMT
Question.....I've tried searching but no luck. I am attempting to carve my own branding iron on a piece of brass. Hasn't gone as I would have hoped. Can someone recommend some good bits to crave brass or aluminum. I bought tabletop videos and resurfaced a new spoil board already Thanks!
|
|
|
Post by activereality on Feb 6, 2020 18:05:53 GMT
Following! I'll need this info soon myself! Haha
|
|
jimfowler
New Member
Posts: 33
Machine: Power Route
|
Post by jimfowler on Feb 7, 2020 5:13:53 GMT
I like Harvey cutters for Al. A little more info on what you're trying to do will help: maybe a pic of the CAD, depth of cut, etc.
|
|
gemmi8
Junior Member
Posts: 87
|
Post by gemmi8 on Feb 7, 2020 12:01:45 GMT
I like Harvey cutters for Al. A little more info on what you're trying to do will help: maybe a pic of the CAD, depth of cut, etc. Here is the image of the file. It would be reversed before I run it. Honestly I am unsure what the depth should be. It will be A branding iron for my projects.
|
|