|
Post by btreichel on Feb 15, 2020 19:15:37 GMT
Did I miss a point in the video where it said to insert an extra t nut in the x and y rails to handle install of the homing switches? I'm at the point where its homing switches, drag chains and router. I hope I'm just missing something obvious about getting thses t-nuts in!
|
|
oldtech
Full Member
Posts: 222
Machine: Power Route
|
Post by oldtech on Feb 15, 2020 19:24:18 GMT
FYI. This may not apply, but there are drop-in t-nuts that can be added after assembly. Search amazon for "drop in t nuts" for availbility.
|
|
|
Post by Bruce on Feb 16, 2020 5:29:59 GMT
|
|
|
Post by btreichel on Feb 16, 2020 16:53:40 GMT
Nothing my bench tp grinder couldn't solve. Faster than prime, and if i got it wrong, there's still prime. But sems to work.
|
|
|
Post by Derek the Admin on Feb 17, 2020 22:55:41 GMT
I've seen where we screwed this up in a certain batch of orders. I think I failed to explain the difference in a drop-in and standard T nut to a new helper. If you haven't already, you can hit up support@millrightcnc.com and we can get you the right ones if needed.
|
|
|
Post by btreichel on Feb 18, 2020 3:56:02 GMT
I've seen where we screwed this up in a certain batch of orders. I think I failed to explain the difference in a drop-in and standard T nut to a new helper. If you haven't already, you can hit up support@millrightcnc.com and we can get you the right ones if needed. Bench grinder fixed it, then I reversed the wiring for a bit.
|
|
|
Post by jamesterm on Oct 8, 2020 1:23:50 GMT
I've seen where we screwed this up in a certain batch of orders. I think I failed to explain the difference in a drop-in and standard T nut to a new helper. If you haven't already, you can hit up support@millrightcnc.com and we can get you the right ones if needed. Bench grinder fixed it, then I reversed the wiring for a bit. Thanks... we were about to go crazy! What made it confusing for us is that the t nuts with the bags that came with the homing switches were too big, we found the smaller ones with a different group and are hoping we picked the correct ones.
|
|