|
Post by jreimers on Jan 30, 2019 22:14:11 GMT
iPhone/iPad update is now available in the app store.
|
|
|
Post by Derek the Admin on Jan 31, 2019 14:11:40 GMT
Thanks Jody!
|
|
|
Post by fyddler on Feb 14, 2019 19:19:56 GMT
I guess I missed a post or to, but THANKS FOR ADDING THE POWER ROUTE! I have been running my 1/4" bit at 150IPM for way to long... time to crank this bad boy up!
|
|
bkcarlson
New Member
Posts: 10
Location: Warner Robins, GA
Machine: Carve King
|
Post by bkcarlson on Feb 19, 2019 19:38:14 GMT
After you order how long does it usually take to get some information other than order number. Just wondering when they send out an order status and estimated delivery date.
Thanks,
|
|
gofer
Junior Member
Posts: 86
|
Post by gofer on Feb 24, 2019 0:49:25 GMT
I got a notice on shipment with tracking within 48 hours of my order - shipping from GA to NV took 5 days.
|
|
petek
Junior Member
Posts: 72
Machine: Power Route
|
Post by petek on Feb 28, 2019 14:41:59 GMT
Is it possible to get steel feeds & speeds added into the calculator? I'm running a Power Route..
|
|
|
Post by joebob296 on Feb 28, 2019 23:01:08 GMT
Is it possible to get steel feeds & speeds added into the calculator? I'm running a Power Route..
|
|
|
Post by remzak on Oct 7, 2019 22:01:32 GMT
In the feed rate calculator (web and Android) the RPM digits get cut off, such that I cannot see the value. How large does the value go? It seems like value can range from 800 to 2,600. However, the DWP611 has an RPM range from 16,000 to 27,000 RPM.
I feel like I am missing something... Are the values provided by the feedrate calculator still useable?
Nevermind... searching through the forum I found other people asking the same thing and the response... I can play with my fonts on my system... I have them set large due to very high resolution on a smallish monitor makes the normal font look like 6 point (very difficult to read).
By the way, on my Android phone (set to normal, out of the box settings), the display only shows three digits for the RPM (values range from 800->999, then to 100->260).
Knowing the actual range is 8,000 -> 26,000 makes the tool very usable.
I do get different values between the online (web) version on the Android version (for the same inputs).
Thank you for creating it.
|
|
|
Post by fracturedtom on Oct 18, 2019 20:55:08 GMT
I'm not seeing this on Google Play Store. What should I search for?
|
|
|
Post by Derek the Admin on Oct 19, 2019 21:05:54 GMT
You should be able to find it just by searching "MillRight CNC"
|
|
|
Post by Derek the Admin on Oct 19, 2019 21:06:54 GMT
Rezmak, we will look into that on another revision.
|
|
|
Post by fracturedtom on Oct 21, 2019 21:37:06 GMT
You should be able to find it just by searching "MillRight CNC" Nope. No results for that search.
|
|
gogogad
New Member
Posts: 44
Machine: Carve King
|
Post by gogogad on Oct 21, 2019 21:46:04 GMT
|
|
|
Post by fracturedtom on Oct 21, 2019 21:59:49 GMT
Well, I just a "Millrightcnc" and "Millright cnc" searches with no results. I can get it from the interwebs, but would rather just install from Google Play.
UPDATE: Typed in your link, went to the page and get "Your device isn't compatible with this version."
I'm running Android 6.0.1. Oh well.
|
|
|
Post by joebob296 on Oct 21, 2019 23:53:02 GMT
Well, I just a "Millrightcnc" and "Millright cnc" searches with no results. I can get it from the interwebs, but would rather just install from Google Play.
UPDATE: Typed in your link, went to the page and get "Your device isn't compatible with this version."
I'm running Android 6.0.1. Oh well.
Can you side load it? I can send you the .apk file.
|
|