rh
New Member
Assembling a CarveKing
Posts: 14
|
Post by rh on Jan 29, 2018 18:19:04 GMT
My CarveKing arrived, i've started assembly! . Assembling the 'v-block' bearings, 2 are feel rough when turned, all other turn smooth. All are tightened just snug. options? thanks, RH
|
|
|
Post by Derek the Admin on Jan 29, 2018 21:37:25 GMT
Are the M5 washers between them?
|
|
rh
New Member
Assembling a CarveKing
Posts: 14
|
Post by rh on Jan 29, 2018 21:48:18 GMT
Yes, i put the m5 washers on all
|
|
|
Post by Derek the Admin on Jan 30, 2018 13:37:18 GMT
OK gotcha. Just making sure because it happens sometimes.
If they’re not going to do right we could replace them.
|
|
rh
New Member
Assembling a CarveKing
Posts: 14
|
Post by rh on Jan 30, 2018 13:41:32 GMT
The rough & smooth bearings measure the same 0.435” across the assembled bearing housing
|
|
rh
New Member
Assembling a CarveKing
Posts: 14
|
Post by rh on Jan 30, 2018 20:41:10 GMT
ok, i would like to finish the assembly with good bearings, so can 2 sets with bearing housings be sent? receipt 1965-1864 thanks, rh
|
|
|
Post by Derek the Admin on Jan 31, 2018 0:08:54 GMT
Yes absolutely. As silly as it sounds we can’t actually look it up by that number.That is something that stripe generated and we don’t have a reference for that in our system.Could you please PM me an order number that will probably be something like 10490 for example. That or just p.m. me your name and will look you up that way and then we will get you taken care of.
|
|
rh
New Member
Assembling a CarveKing
Posts: 14
|
Post by rh on Jan 31, 2018 15:23:18 GMT
order # 10550 Ralph Hodgin thanks, RH
|
|
|
Post by Derek the Admin on Jan 31, 2018 18:36:07 GMT
Thanks Ralph.
I'll get this taken care of.
|
|
|
Post by Jerry on Feb 3, 2018 3:16:51 GMT
Tip: Always try to press the bearing by the outer ring if that is where the press fit is.
You could try blowing dirt out and then a drop of oil.
Once the bearing balls press a dent into the race it will always feel notchy after that.
Derek is the man, he will help you succeed.
|
|