kmp
New Member
Posts: 8
|
Post by kmp on Aug 28, 2018 14:53:41 GMT
For the next person who puts the bed in backwards: I used a 7/64 bit to drill a hole 1/2 inch deep. Location was 6 7/8" from front edge of bed and 15/16" from the left edge as near as I could tell measuring it out. It works as advertised.
|
|
|
Post by Derek the Admin on Aug 29, 2018 2:25:09 GMT
Thanks for sharing the remedy.
|
|
kmp
New Member
Posts: 8
|
Post by kmp on Aug 29, 2018 20:58:36 GMT
My pleasure. I would also suggest putting that homing switch on before mounting the x axis idler pulley, while the unit is still on its side on the left frame. I ended up standing it back up on a couple of 2x4 pieces to provide clearance for the idler pulley and bracket. Not a real big deal, I had some chunks laying around. but would have been more comfortable if it was less tippy as when on the entire frame.
|
|