|
Post by Bruce on Jul 17, 2019 22:19:33 GMT
But I have three new questions: 1. When jogging X, Y, or Z, why do I get the message "Use separate sizes for Z and XY"? Typically the XY can jog at a larger incremental distance where the Z would use a smaller increment.
2. Is there a listing of error messages and possible solutions when using the UGS? Errors messages (and alarm messages) are typically generated by the GRBL control software and a list can be found here: github.com/gnea/grbl/wiki/Grbl-v1.1-Interface UGS just displays what ever GRBL sends it.
3. I am now starting back to assembly instructions (page 33) building the electronics enclosure kit. Currently, I have $20=0 and $21=0. Are these correct? Yes, these should both be set to zero.
|
|
skale
Junior Member
Posts: 57
Location: Newport NC
|
Post by skale on Jul 18, 2019 0:53:51 GMT
Thanks Bruce
|
|
|
Post by Derek the Admin on Jul 18, 2019 15:57:05 GMT
Excellent news Skale!
|
|