cris
New Member
Posts: 33
|
Post by cris on May 28, 2020 1:38:39 GMT
|
|
|
|
Post by btreichel on May 28, 2020 3:51:29 GMT
If you are talking about the wires to the stepper motors, not a good idea,
|
|
cris
New Member
Posts: 33
|
Post by cris on May 28, 2020 7:22:22 GMT
If you are talking about the wires to the stepper motors, not a good idea, Yes i want to extend the cables of the nema 17 motors what i can do ? |
|
|
|
Post by btreichel on May 28, 2020 14:46:10 GMT
|
|
|
|
Post by Bruce on Jun 3, 2020 2:28:39 GMT
|
|
cris
New Member
Posts: 33
|
Post by cris on Jun 3, 2020 7:03:23 GMT
To late i bought this ,i hope works or should i returned ? if this work can i use it also to extend the home switch also ? Or need to get the proper awg for the home switch ? I don't cutting nothing im just making an extra extension for the motors and home switch coming for the electronic box i making so is more easy to unplugged and plugged everything? What do you think? Thank you again for your knowledge. Nano Shield NS085 Hook-up Stranded Wire 22 AWG with UL3132, 6 Colors (23ft Each) Flexible 22 Gauge Silicone Wire Rubber Insulated Electrical Wire, 300V Tinned Copper Electric Cable for DIY www.amazon.com/dp/B07BWC596B/ref=cm_sw_r_other_apa_i_GJ01EbXCDPM1FGlarks 486Pcs Wire Crimper Plier with Connector Set, SN-28B Ratchet Crimping Tool with 485Pcs 2.54mm 1 2 3 4 5 6 7 Pin Housing Connector Male Female Pin Header Crimp Connector for AWG28-18 Dupont Pins www.amazon.com/dp/B07VQ6YNSC/ref=cm_sw_r_other_apa_i_8Q01Eb8VHGPBB |
|
|
|
Post by Bruce on Jun 8, 2020 4:53:13 GMT
That should work great. 👍
|
|
cris
New Member
Posts: 33
|
Post by cris on Jun 8, 2020 19:54:18 GMT
Im gonna post some pictures when i done ty for everything.
|
|
mike9
New Member
Posts: 5
|
Post by mike9 on Jul 13, 2020 10:51:46 GMT
Hi Did you get them working?
I have the problem that the don't work.
Kind regards,
Mike
|
|
cris
New Member
Posts: 33
|
Post by cris on Jul 19, 2020 17:13:51 GMT
Hi Did you get them working? I have the problem that the don't work. Kind regards, Mike They work fine Make sure test all the cables to make sure every end is secure to each cable |
|
