64E Driver
New Member
Posts: 10
Machine: Carve King
|
Post by 64E Driver on May 30, 2020 20:59:13 GMT
Here's my first project on the CK. 8.5x16in. Trial is out of mdf and ultimately I want to do it out of red oak for a going away plaque. Next thing it to try and figure out how to get rid of the lines.
|
|
|
Post by Bruce on Jun 6, 2020 4:16:51 GMT
Very nice work. It might be easier to just hand sand the lines. The other thing to try is a finish cut with a smaller diameter bit with an step over of 80% or 90%.
|
|