|
|
Post by jewishbacon on Jun 4, 2020 0:35:39 GMT
I placed the order for the Mega V the other day, and now I am designing a table for it (and enclosure). I was hoping someone could measure theirs and let me know if the XL machine is 42″ deep by 48″ (footprint from the website) *including* the cable chains? Or if its wider than that.
|
|
jeffm
New Member
Mega V XL Alum bed, 4th axis
Posts: 7
|
Post by jeffm on Jun 4, 2020 1:18:39 GMT
Just finished my bench MegaV XL actual is 52 wide with cable chains and 42.5 deep. I am planning a cover so I over built bench as 55 x 46 which give me a clean 2x4 around the Mega V so I could also build out a cover and not be too tight so I am able to clean around it and route cables. I kept the t-slot table back 1.75 inches from the front verticals, which allowed me to cut out recess in the front edge 3.75" deep, now I can machine the boards ends (dovetails etc.) and I also mounted the 4th axis hanging from the t-slot front edge slot.  |
|
