|
Post by frankk on Jul 5, 2020 22:00:36 GMT
I am new to cnc machines. I have a mega v and I can't seem to to be able to get it to work. The tool path seems to be ok but after I zero it out on the lower left corner of the stock and lift the router 10mm I send the gcode and the router lifts up and moves to the left and stops. I know it is probably something simple but what am I missing or doing wrong?
|
|
|
Post by btreichel on Jul 5, 2020 23:11:00 GMT
you set your x,y,z zero point and start the toolpath. don't lift, what you are seeing is the machine lifting for you.
|
|