|
Post by aurimas on Aug 9, 2020 0:55:04 GMT
After the assembly of my M3 and the first few test runs I decided to make a small welcome sign for our home. I used a 1/16 upcut bit and 1/4" plywood sheet. It turned out alright. I think I probably should have run it at slower feed rate to reduce chipping. imgur.com/a/OLpXlDK
|
|
|
Post by Bruce on Aug 9, 2020 2:08:48 GMT
Looks great! Congrats on your first project. Plywood is tough to cut. A downcut bit would help with tearout and chipping.
|
|
oldtech
Full Member
Posts: 222
Machine: Power Route
|
Post by oldtech on Aug 9, 2020 2:20:02 GMT
|
|