Mega V confusing motors

[sahadev]

I was going to install the Z motor on the Mega V XL when I noticed that I have one motor hand marked as 2550(101"?), with a shorter cable and a black wire twist, and three motors that are unmarked(144"?), all with same length longer cables and white zip ties. I see no markings on any of the three motors for the motor size. It appears to me that I have a single 2550 and three of the 3550 motors. Does that sound right? Will it work to use the 2550 as the single motor on the X axis and the three other motors for Y and Z? To me that seems like it would slow down the X axis and speed up the Y axis.

Thanks...Paul

[sahadev]

OK, after reviewing the build video once again, I finally noticed that the numbers 2550 and 3550 are the cable lengths, and the motors are all the same beyond that. So I will use the 2550 on the Y rail closest to the control box.

[jv]

millright-megav-docs.readthedocs.io/en/latest/