MEGA V XXL

[jeffery]

I JUST COMPLETE ASSEMBLY SO KNOW IM TRYING TO FIGURE OUT THE NEXT STEP DO I PLUG MY TABLET OR LAPTOP VIA USB? IS THE SYSTEM PLUG AND PLAY

[kevin]

If you haven't already done so, you'll need to download MillRight's version of Universal G code Sender. Here's a link from the MillRight Resoures page on machine operating basics that also includes a link to the MillRight USG download. millrightcnc.com/wp-content/uploads/2022/01/Operating-and-Troubleshooting-Guide-version-1p00.pdf

[MillRightWes]

www.youtube.com/watch?v=fUa4f81S4kk

This is a video showing the steps to connect a machine to Universal G Code Sender. Follow the steps to download UGS.

Plug the USB cord into the computer and the machine's electronic box. Bring up UGS. Hit the refresh button in the top left of UGS. It is a circle made of two arrows. The correct com port should be selected automatically. Click the plug icon left of the refresh icon. The plug will turn yellow and some settings should scroll across the console screen. If you connect without the text appearing, you have connected to the wrong com port.

You should be able to move the machine around using the jog controller. Make sure your XY step size is set to 10, the Z step size 4, and your feed rate is set to 9,000.

If you have any problems email [e-mail] for help.

[jeffery]

THANKS EVERYONE I GOT THE G CODE DOWNLOADED BUT WHEN MY THE AXIS THAT THE ROUTER IS ON IT GET TO THE END OF THE RAIL ONE SIDE GOES PASS THE END OF THE RAIL AND IT KEEPS JUMPING IN PLACE

[rickpwcc]

Did you get this fixed because the last post is back in May

[MillRightWes]

Are you having a similar problem?