|
Post by ironmandylan on Aug 18, 2022 23:12:10 GMT
Hi,
I have a Power Route that I have run hard. Right now when the machine is powered up the x axis is generating holding torque but the y axis isn't. But both axis still jog around just fine. I find this very weird and am worried about losing position.
Thanks
|
|
|
Post by MillRightWes on Aug 19, 2022 15:04:01 GMT
How are you testing for loss of torque?
The first thing I would mention is the coupler. Make sure it is tight.
We need to see if the motor is the problem or the driver. You can switch the x and y motor on the back of the control box. See if the loss in torque follows the y or is transferred to the x. This should tell us if it is the motor or the driver.
|
|
|
Post by MillRightWes on Aug 24, 2022 16:58:35 GMT
Just seeing if you have any updates.
|
|