|
Post by afield0 on Sept 2, 2022 15:05:38 GMT
I overwrote my Mega V XL's grbl firmware with 1.1f, and now I can't get the machine to jog or move at all. I'm not using a 4th axis.
I either need the original arduino-mega firmware, or the settings to put in defaults.h and config.h to get the generic firmware going.
I've emailed support, still waiting on a response there.
|
|
|
Post by MillRightWes on Sept 2, 2022 18:54:13 GMT
I have sent the original firmware for the 3 axis machine to your email.
|
|