|
Post by jreimers on Aug 23, 2017 16:04:41 GMT
Lookie here what I got at the office today!!!!!!
|
|
|
Post by Derek the Admin on Aug 23, 2017 16:32:33 GMT
That got out there pretty quick. Have fun!
|
|
|
Post by aforww on Aug 23, 2017 16:37:44 GMT
And so it begins lol
|
|
|
Post by breslinmr on Aug 23, 2017 19:32:30 GMT
Have fun 👍
|
|
|
Post by jreimers on Aug 25, 2017 14:42:04 GMT
Okay.. I just got around to opening up the box. yeah, I know... It wasn't easy waiting but I have been swamped with work and family. I have to say, it overwhelmed me when I looked inside. I have read through the instructions once already, so I know I can do it, but dang! When you see ALL of the parts at once it makes your head swim.
|
|
|
Post by Derek the Admin on Aug 25, 2017 14:55:41 GMT
An elephant is eaten one bite at a time. It seems like a lot but they start getting fewer and fewer before you know it. I applaud you for having read through the instructions. Some people don't and it costs them time in the long run.
|
|
|
Post by kec-10238 on Aug 25, 2017 16:27:18 GMT
same thought, but it's easier than it looks - great direction
|
|
|
Post by jkendall on Aug 26, 2017 15:22:03 GMT
You got a local Emmy in the mail?
|
|
|
Post by jreimers on Aug 28, 2017 19:19:08 GMT
|
|
|
Post by jreimers on Aug 28, 2017 19:23:24 GMT
You got a local Emmy in the mail? Haha... No, but I hear they will ship them if you can't make it to the banquet. I can't turn down free food so I go.
|
|
|
Post by Derek the Admin on Aug 28, 2017 20:28:40 GMT
That looks awesome. I like the scheme, but you might have to convince the guys at the office you're not a Steelers fan. You'll have to preference every viewing of the machine with "It's just the MillRight colors, I really am a Cowboys fan." lol
|
|
|
Post by jreimers on Aug 28, 2017 20:42:22 GMT
I like the scheme, but you might have to convince the guys at the office you're not a Steelers fan. You'll have to preference every viewing of the machine with "It's just the MillRight colors, I really am a Cowboys fan." lol MillRight and Dewalt, since I am using the DWP611. I am going to take your logo into Adobe Illustrator and make an eps out of it so I can take it down to the Vinyl shop and have them print me out a couple of Logo Stickers so I can put it in the lower right corner of the machine... gotta brand it, Friend. I'll never be a Steelers fan. Just can't happen. Alex told me he would stop helping me if I painted it Blue and Silver.
|
|
|
Post by Derek the Admin on Aug 28, 2017 21:22:20 GMT
LOL. He's a lot of help so you better comply.
|
|
|
Post by aforww on Aug 28, 2017 22:57:44 GMT
Lmao glad to see I don't have to Black list ya man. It's looking good.
|
|
|
Post by jreimers on Aug 30, 2017 15:45:17 GMT
Need some help. I was doing great. Everything seemed to be going as planned Then, I plugged it in. Com port found. Opened the com port and got the below screen. Ran the $H"|"$X command to unlock. The Z Plate moved up until it hit the homing switch then stopped, adjusted, then stopped again. Then the Bed moved toward me until it hit the homing switch then stopped adjusted and stopped again. Then both the Bed and Z Plate shifted again and everything stopped. The I got this Screen. Any Help would be appreciated. Attachments:
|
|