Projects

[bowhntr7846]

I have set it all up extruded and now am in CAM. My XYZ does not match the Fusion tutorial I am trying to follow?

[aforww]

Dec 8, 2016 1:50:24 GMT bowhntr7846 said:

I have set it all up extruded and now am in CAM. My XYZ does not match the Fusion tutorial I am trying to follow?

I'll await your email but from the sounds of it, it's your "setup" settings in the cam process. We'll hash it out over email and we'll post the results in here in case there are others that get the same thing.

[bowhntr7846]

Dec 8, 2016 2:04:30 GMT aforww said:

Dec 8, 2016 1:50:24 GMT bowhntr7846 said:

I have set it all up extruded and now am in CAM. My XYZ does not match the Fusion tutorial I am trying to follow?

I'll await your email but from the sounds of it, it's your "setup" settings in the cam process. We'll hash it out over email and we'll post the results in here in case there are others that get the same thing.

YESSS! I cant imagine I'm the only one struggling. LOL. But, yes as much learning that I can pass on to others the better. And the more knowledge you can teach the better off the whole community is.  Thank you for your time!

[aforww]

Dec 8, 2016 2:09:42 GMT bowhntr7846 said:

Dec 8, 2016 2:04:30 GMT aforww said:

I'll await your email but from the sounds of it, it's your "setup" settings in the cam process. We'll hash it out over email and we'll post the results in here in case there are others that get the same thing.

YESSS! I cant imagine I'm the only one struggling. LOL. But, yes as much learning that I can pass on to others the better. And the more knowledge you can teach the better off the whole community is.  Thank you for your time!

Not a problem bud. The guys here have been a huge help in my learning process as well. I spend at least 5-6 hours a week in Fusion playing with designs learning new things. It's a steep curve for sure lol.

[Derek the Admin]

This link is going to explain orientations in both CAD and CAM better than I ever could:
www.mechanicaladvantage.com/blog/2015/11/5/work-coordinate-system-creation

Aforww has really made some things happen quickly in Fusion 360 as well, so you will learn a lot from him.

[aforww]

Dec 8, 2016 4:31:35 GMT Derek the Admin said:

This link is going to explain orientations in both CAD and CAM better than I ever could:
www.mechanicaladvantage.com/blog/2015/11/5/work-coordinate-system-creation

Aforww has really made some things happen quickly in Fusion 360 as well, so you will learn a lot from him.

Excellent reference and hits the nail on the head in reference to CAM setup stuff. Could have used that before lol.