djh
New Member
Posts: 36
|
Post by djh on Jan 11, 2018 11:35:09 GMT
Tried to find MillRight on the post process tab of Fusion. Now stuck with no way to get my design to the router. Does some have a step by step procedure to do this for the CARVE KING! This is frustrating, because there is not (or I cannot find) any instructions on how to get this to the router. This is totally new discipline for me.
|
|
|
Post by Bones M&E on Jan 11, 2018 15:18:02 GMT
I am definitely not the guy to be helping, I'm very new to cnc as well, finally figured out how to get my little M3 moving around. But maybe, just maybe, I can. I don't know the lingo but here's what I did to get my M3 moving.
In the post processer go to vendors, scroll down to grbl and select it, give it a name.and hit post. Then another black box pops up, I do nothing in that, just hit save in that, then load the saved file into my ugs platfowm software. And it's been working
|
|
djh
New Member
Posts: 36
|
Post by djh on Jan 11, 2018 15:48:31 GMT
Thanks for the info. Will try this evening..
|
|
|
Post by Bones M&E on Jan 11, 2018 16:04:28 GMT
Thanks for the info. Will try this evening.. Np, like I said, I am very new, and not the right help, I was kinda in the same spot a week ago, so hopefully it helps a little.
|
|
|
Post by Derek the Admin on Jan 11, 2018 23:08:28 GMT
Have a look at the video tutorial post at the top of the general forum. There are a few videos there that show you exactly how to do this in Fusion. The videos will explain some of the quirks to watch out for too.
If you come across any snags let us know we can help you out
|
|