tim
New Member
Posts: 48
|
Post by tim on Nov 24, 2018 15:48:41 GMT
I need to scan rounded objects with my CNC machine so i can have correct 3D Models to calculate the toolpaths. max i need to scan 10x10" and 3" depths, most of the times i need to scan half of that size. What's my best option for this task? will this one help me? shop.nextwaveautomation.com/shop/item.aspx?itemid=2 i can't find any infos about software, controlling my cnc machine and outputting a STL file
|
|
|
Post by Bruce on Nov 24, 2018 22:02:24 GMT
I don't think I have seen anything like this for a GRBL controller. Autodesk has a photo to 3D software called ReCap but other than that I don't know anything about it.
|
|
Catamarack
New Member
Posts: 27
Machine: Power Route
|
Post by Catamarack on Nov 24, 2018 23:18:58 GMT
I'm pretty sure the nextwaveautomation touch probe is specific to their machines. I looked those over a bit while I was deciding what to buy and everything I could find looked like it only plugged into their stuff, which appeared mostly proprietary.
|
|
|
Post by Derek the Admin on Nov 25, 2018 2:30:50 GMT
Someone was showing estlcam using this to adjust g code to a surface the other way.
|
|
tim
New Member
Posts: 48
|
Post by tim on Nov 26, 2018 11:04:05 GMT
|
|