alpscraftshack
New Member
Posts: 25
Location: Glendora, California
Machine: Carve King
|
Post by alpscraftshack on Dec 22, 2018 19:38:25 GMT
It has now been a bit over a year since I purchased my Carve King. After a couple of minor assembly & operation issues (which is normal for a kit that is assembled by someone not knowledgeable with the equipment), that Derek so kindly helped me through, the machine has been great. I have been using it 5 day a week at 4 to 5 hours per day, and, it has worked flawlessly. Even after a couple of spindle crashes, the machine has maintained its accuracy. I have made enough, during this year, to fully pay for the Carve King, the M3 I purchased a month earlier, and even buy some additional small tools for my shop. Kudos to Derek & MillRight for making great machines.
|
|
|
Post by Derek the Admin on Dec 22, 2018 21:42:15 GMT
Thanks for the nice report on the Carve King one year later.
|
|
|
Post by ricko on Dec 23, 2018 16:54:11 GMT
It has now been a bit over a year since I purchased my Carve King. After a couple of minor assembly & operation issues (which is normal for a kit that is assembled by someone not knowledgeable with the equipment), that Derek so kindly helped me through, the machine has been great. I have been using it 5 day a week at 4 to 5 hours per day, and, it has worked flawlessly. Even after a couple of spindle crashes, the machine has maintained its accuracy. I have made enough, during this year, to fully pay for the Carve King, the M3 I purchased a month earlier, and even buy some additional small tools for my shop. Kudos to Derek & MillRight for making great machines. What are you making and where are you selling?
|
|
|
Post by Bruce on Dec 24, 2018 3:48:45 GMT
|
|
alpscraftshack
New Member
Posts: 25
Location: Glendora, California
Machine: Carve King
|
Post by alpscraftshack on Dec 27, 2018 2:18:20 GMT
Thanks for posting the link to my Etsy Shop Bruce. I was kinda busy for the Holiday. The stuff I make is very simple and pales in comparison to many of the things a lot of you guys make.
|
|
|
Post by kevin on Dec 27, 2018 11:08:00 GMT
Congrats on the success you've had!
|
|
|
Post by Hommer Woods on Dec 27, 2018 13:15:59 GMT
Thanks for posting the link to my Etsy Shop Bruce. I was kinda busy for the Holiday. The stuff I make is very simple and pales in comparison to many of the things a lot of you guys make. Simple is great, especially when it generates that kind of revenue.
|
|