|
Post by ThePayneHouse on Feb 24, 2019 14:11:47 GMT
Using UGS software to jog router, I have step size set for 1 mm, but I'm getting a step size of 1 cm.
If I set step size for 0.1 it appears to be 1 mm. Is this normal??
|
|
|
Post by aquanub on Feb 24, 2019 14:31:05 GMT
one of the jumpers could be off on the controller, what machine do you have?
|
|
|
Post by ThePayneHouse on Feb 24, 2019 14:53:57 GMT
I have the carve king.
|
|
|
Post by ThePayneHouse on Feb 24, 2019 15:11:35 GMT
OK...checked jumpers, and you were right. I had changed out board during some trouble shooting and forgot to insert in new board.
Thanks!
|
|