bkcarlson
New Member
Posts: 10
Location: Warner Robins, GA
Machine: Carve King
|
Alarm
Feb 27, 2019 1:59:01 GMT
Post by bkcarlson on Feb 27, 2019 1:59:01 GMT
I had my carve King for two days running fine then I stated getting alarms. Possible limit or sudden stop alarms. I finally figured out that if I disconnected the limit switches every thing was fine. I ohmed out the switches and all seemed fine. Any ideas, if I reconnect the switches I get the same alarm.
Thanks,
Brian
|
|
|
Alarm
Feb 27, 2019 12:48:44 GMT
via mobile
Post by Derek the Admin on Feb 27, 2019 12:48:44 GMT
Sounds like you have your hard limits enabled in your settings. We don’t ship it with hard limits enabled and this is the reason why. That’s what you should only be active and listening during a homing cycle.
|
|
bkcarlson
New Member
Posts: 10
Location: Warner Robins, GA
Machine: Carve King
|
Alarm
Feb 27, 2019 13:23:43 GMT
Post by bkcarlson on Feb 27, 2019 13:23:43 GMT
How do I check to see where this is activated?
Thanks,
|
|