|
Post by Bruce on Jul 15, 2019 0:46:20 GMT
In the UGS software click on the house icon to start the homing process.
Homing Cycle Steps By default, the homing cycle goes through the following steps:
Z axis: Z Axis will move up (positive) with Fast Rate ($25) When Z home switch triggered, Z stop for a short time ($26) and back off a distance ($27) Z Axis will move up slowly until it touches the Z home switch again ($24) Z Axis backs off a small distance ($27) X and Y axis: X, Y Axis move both to Homing direction at fast rate ($25) The first Axis triggers the switch will stop and wait for the second axis to trigger When second axis triggers the switch, both axis back off a distance ($27) Both X and Y axis will move toward switches again slowly, until both switches triggered again ($24) Both X and Y axis will back off a small distance ($27)
When this done the machine homing is complete.
|
|