|
Post by carlos on Jul 11, 2019 15:25:49 GMT
Day two of the build and so far so good. Except for two things: 1) This morning I noticed that the coupler free spins around the lead screw. Picture link here: www.dropbox.com/s/qaixrhc8uvpx87v/20190711_100403.jpg?dl=02) I don't want to tighten the screw more as it will strip. Which brings me to me second issue. I have stripped the head of screw on the coupler and I don't know how to remove it.
|
|
|
Post by Derek the Admin on Jul 12, 2019 13:01:00 GMT
Hey Carlos. I think I talked to you yesterday. I assume all is well with this now?
|
|
|
Post by carlos on Jul 13, 2019 15:42:32 GMT
Hi Derek! Yes and thank you for walking me through the troubleshooting. It really helped me to solve the problem I was having
|
|
|
Post by drnyj1313 on Dec 19, 2019 0:47:14 GMT
Sounds like I’m having the same issue. The step motor and couplers spin but the lead screw doesn’t . How were you able to resolve this?
|
|
|
Post by Bruce on Dec 21, 2019 8:01:09 GMT
Make sure the coupler set screws are tight on the lead screw.
|
|