rcferguson
Full Member
Posts: 182
Machine: Carve King
|
Post by rcferguson on Aug 7, 2019 1:36:42 GMT
I’m trying to engrave an image using CAMBAM. When I import g-code file into UGS the size comes out .04” wide & .15” high. I used dxf exported from Inkscape. I thought by resizing to 6” x 4”. How do I resize image to cut a 6” x 4” part? I'm guessing you originally worked in inches, but your program imported using mm. Don't know the program, but that where I'd start looking. You could try changing Inkscape to work in mm before doing the dxf export...
|
|
|
Post by Derek the Admin on Aug 7, 2019 14:10:16 GMT
I agree with Rob.
Also, make sure your sizes are consistent when moving from Inkscape to CamBam.
|
|