|
|
Post by aquanub on Aug 17, 2019 15:37:00 GMT
hey all
I've been using fusion360 almost exclusively but decided to also get vectric for some simpler jobs as fusion seems to be overkill for basic carving.
I have everything pathed, but when I am going to export it is asking me to find the correct post processor (.pp) file. I assume there is a GRBL post processor I am supposed to use, can someone point me in the right direction?
thanks!
|
|
|
|
Post by Hommer Woods on Aug 17, 2019 19:19:06 GMT
hey all
I've been using fusion360 almost exclusively but decided to also get vectric for some simpler jobs as fusion seems to be overkill for basic carving.
I have everything pathed, but when I am going to export it is asking me to find the correct post processor (.pp) file. I assume there is a GRBL post processor I am supposed to use, can someone point me in the right direction?
thanks!
When you are saving the gcode file it should allow you to pick one of the grbl post processors. There is one for inches and one for mm. Attachments:
|
|
|
|
Post by Derek the Admin on Aug 17, 2019 21:46:08 GMT
Stephen covered it. Thanks Stephen.
|
|
|
|
Post by aquanub on Aug 18, 2019 13:53:11 GMT
ah silly mistake on my end, I was looking for the save under the toolpaths menu up top and not the icon on the right. LOL.
thanks guys.
|
|
|
|
Post by Derek the Admin on Aug 19, 2019 19:11:34 GMT
Glad you got it.
|
|
