|
|
Post by fairclothcomposites on Dec 7, 2019 12:39:35 GMT
During one of my cleanings on the machine(power route) I noticed that some of the set screws on the linear bearings have fallen out and probably been sucked up by my vacuum. Does anyone know the size and thread pitch of those so I can get some? I asked on the Millright CNC parts website when I ordered extra limit switches but never got a reply. Maybe it went to my spam folder and I missed it 🤷♂️
Thanks guys
|
|
|
|
Post by Derek the Admin on Dec 7, 2019 22:32:24 GMT
They have varied between batches some, but an M4x8 sockrt head will most likely be it. Also, that website I presume you are referring to belongs to a separate company that ships some items from our inventory and has other associations, but it is not MillRight CNC. The person who administers that site wouldn't know any specifics, so you should always email us with questions.
|
|
|
|
Post by fairclothcomposites on Dec 8, 2019 0:36:56 GMT
They have varied between batches some, but an M4x8 sockrt head will most likely be it. Also, that website I presume you are referring to belongs to a separate company that ships some items from our inventory and has other associations, but it is not MillRight CNC. The person who administers that site wouldn't know any specifics, so you should always email us with questions. Thanks The paypal said I paid millrightcnc so I assumed it was but no big deal. I'll have to grab some at the hardware store and put a bit more lock tight on them this time |
|
