|
|
Post by awestruck on Feb 23, 2020 19:22:18 GMT
I'm back to doing some assembly on my Mega V 19x19 CNC. It wasn't clear to me, so I thought I'd ask, how to justify or position the T-Slot table. Should everthing be justified to the front of the machine, center or to the back? If I had to guess I'd say the front.  |
|
|
|
Post by awestruck on Feb 24, 2020 11:33:39 GMT
Looking at the assembly video again, it looks like the T-Slot should be justified forward in the machine.
|
|
|
|
Post by Derek the Admin on Feb 24, 2020 15:11:24 GMT
It's up to you. If you put it further back you give up some place for sheet goods, but you gain overhang for dovetailing the end of pieces stood vertically, if that's important to you.
|
|
atbader
New Member
Posts: 1
Machine: Other
|
Post by atbader on Mar 4, 2020 0:11:07 GMT
I centered mine on my 35x35. The problem I have run across is that my Y rails are not square. I'm about 1/8 of an inch out of square.
|
|
