|
Post by emoseman on Aug 11, 2023 13:17:24 GMT
I'm an owner of a Millright Mega V XL and I'm in the process of squaring the rails and I'd like to use the slots available in the end of the rails to help with that. So if there any information on the specifications for the rail's extrusion profile that would be very helpful.
Also, while trying to remove the rail endcaps, one bolt on each side in the front has seized. I've got a new extractor kit coming soon from Amazon, but so far the one I have hasn't worked. Any advice on getting these bolts out is welcome.
Thanks!
-- Evan
|
|