|
Post by Bruce on Oct 7, 2017 4:51:56 GMT
Thought I would do a v-carving using F-engrave. I found the picture on my Chromecast and thought it might work. But it looks like there is too much detail in the drawing. Seems I have lost some detail in the carving.
|
|
|
Post by Derek the Admin on Oct 7, 2017 13:31:55 GMT
It kind of looks like some of the features didn't even get written to the code. It looks like you faced the material first, so that should have taken care of any height differences.
|
|