|
Post by kec-10238 on Oct 7, 2017 14:44:30 GMT
not sure if the router pulls substrates up when the z lifts up the bit but was thinking of adding a sliding square (if you will) to attach to the CK t-slot table. Will be used for straight edged substrate once aligned with the router horizontal path. Is removable. Plus some other sliding type clamps to "pin" the rectangular/square substrate in place for top and right sides. worth it or not really. any thoughts? I guess I could draw a billion holes and use pegs as well.
|
|
|
Post by Derek the Admin on Oct 7, 2017 19:06:34 GMT
|
|
|
Post by kec-10238 on Oct 8, 2017 1:25:23 GMT
so much to learn - so little time thanks
|
|