|
|
Post by markwisniowski on Nov 8, 2017 22:16:24 GMT
|
|
|
|
Post by kec-10238 on Nov 9, 2017 0:19:08 GMT
pretty wicked loooking
|
|
|
|
Post by Derek the Admin on Nov 9, 2017 0:28:03 GMT
Very cool work. This will probably get featured on Facebook later. Ya know, I could see a market for larger pieces like this for wall decor. I'd put one up in my house.
|
|
|
|
Post by Hommer Woods on Nov 12, 2017 0:40:46 GMT
Very cool. The texture adds to the look for sure.
|
|
dare
Junior Member
Posts: 67 
|
Post by dare on Nov 20, 2017 1:48:47 GMT
Nice. I like the geometric shapes up against the raw wood edge. Ive been wanting to try some polygonal forms like this. I need to get aV-bit.
|
|
|
|
Post by markwisniowski on Nov 20, 2017 14:52:34 GMT
Nice. I like the geometric shapes up against the raw wood edge. Ive been wanting to try some polygonal forms like this. I need to get aV-bit. Thanks! This was done with an 1/8" flat endmill for a roughing pass and then switched to a 1/16" ball nose bit for finishing passes. I didn't use a V-bit. |
|
dare
Junior Member
Posts: 67
|
Post by dare on Nov 22, 2017 6:07:18 GMT
Makes sense. Thanks!
|
|
|
|
Post by Big Man Black T-Shirt(Patrick) on Dec 10, 2017 2:24:26 GMT
How long did it take to carve all that? Looks cool!
|
|
|
|
Post by markwisniowski on Dec 12, 2017 16:55:32 GMT
How long did it take to carve all that? Looks cool! Thanks! Total time was 2.5 hours. |
|
