|
Post by Hommer Woods on Nov 18, 2017 17:20:38 GMT
I created this ring with the M3 and a drill press. It is made from Bloodwood and Maple. There is probably 2-3 hours of work not counting glue and finish dry times. The cnc job is very quick at about 3 minutes so most of the time goes into creating the ring blank and finishing. At this site you will find pictures of the process, instructions, a crv file created with Cut2D and a gcode file if you are interested. drive.google.com/drive/folders/1XDgJBKfkFYnzAHiGsFvjsVR5jMVuieVNAttachments:
|
|
|
Post by aforww on Nov 18, 2017 17:57:03 GMT
Nice work. I make stainless and wood rings on the lathe sometimes.
|
|
|
Post by Hommer Woods on Nov 18, 2017 18:02:13 GMT
Thanks. Decided to give this a try since I don't have a lathe.
|
|
|
Post by aforww on Nov 18, 2017 18:10:35 GMT
Thanks. Decided to give this a try since I don't have a lathe. Came out good. Adapt and over come.
|
|
|
Post by Derek the Admin on Nov 18, 2017 22:57:55 GMT
I'm really impressed. That's really great work. I forsee you selling a ton of those on Etsy
|
|
|
Post by mrkandangi on Nov 18, 2017 23:13:32 GMT
Now that is some nice work! I hope to be there someday with the workmanship.
Mark
|
|