|
|
Post by lostwoodworker on Jan 28, 2018 5:58:06 GMT
This is almost complete. Just waiting on my brushes. I'm using VCarve Pro and I've never done CAD or any programing. I've only ever drawn on Microsoft Paint. HAHA. Well thanks to a couple here I'm very thankful to their posts giving their ideas. I also gathered some ideas off YouTube. So, that being said, here is my take on a Dust Shoe. Hope you like.
 
|
|
|
|
Post by Jason R on Jan 28, 2018 5:58:55 GMT
Awesome!
|
|
|
|
Post by lostwoodworker on Jan 28, 2018 6:00:49 GMT
|
|
laks
Junior Member
Posts: 86 
|
Post by laks on Jan 28, 2018 6:01:02 GMT
just wow! well done mate
|
|
|
|
Post by lostwoodworker on Jan 28, 2018 6:05:05 GMT
|
|
|
|
Post by lostwoodworker on Jan 28, 2018 6:05:57 GMT
Thanks Laks. This VCarve Pro is pretty fun. Now I just need ideas so I can make cool things. |
|
|
|
Post by Jerry on Jan 28, 2018 13:23:06 GMT
If you can do that for your first project, you can do anything!
Nice designing!
Jerry
|
|
|
|
Post by Jerry on Jan 28, 2018 13:43:20 GMT
There is a button on the router motor. It is the spindle lock button. With my dust boot, I had to drill and tap a hole on the side. When I run a bolt in that hole it presses the button. Then I can wrench on the collet.
Don't forget to remove that bolt before you hit the power on switch like I have twice allready LOL.
(I guess that is why they make red ribbons that say "Remove before flight"!)
|
|
|
|
Post by Bruce on Jan 28, 2018 15:27:54 GMT
Great work. Now I have to start on one of these!
|
|
|
|
Post by Derek the Admin on Jan 28, 2018 22:47:28 GMT
Nice design
|
|
|
|
Post by lostwoodworker on Jan 28, 2018 23:09:58 GMT
Thanks Derrick! You too for this machine! |
|
|
|
Post by lostwoodworker on Jan 29, 2018 4:27:17 GMT
Great work. Now I have to start on one of these! Thanks berogers. |
|
|
|
|
|
Post by lostwoodworker on Jan 29, 2018 14:10:44 GMT
lever to help you out on bit change  That’s crazy. I like that whole thing. |
|
|
|
Post by VGCustomShop on Feb 3, 2018 9:55:03 GMT
Well done!
|
|
