|
Post by VGCustomShop on Mar 2, 2018 0:27:52 GMT
Tried to run a homing cycle - x and y home fine - z will not - z moves but doesn't raise to trip the switch - any ideas?
Thanks for any help
|
|
|
Post by VGCustomShop on Mar 2, 2018 0:34:47 GMT
Solved: one of the wires had broken - soldered it and now everything works as it should!
|
|
|
Post by Bruce on Mar 2, 2018 1:27:48 GMT
Seems like that Z axis limit switch takes a beating.
|
|