Spoil Board Design

[djh]

Does anyone have a spoil board design for the Carve King that they would be willing to share?

[Bruce]

Alex (aforww) had some pictures up of his setup with a spoil board but I'm not finding it. Basically he mounted a spoil board piece between each rail with counter sunk screws into the base of teh Carve King.
I have found it easy just to mount the spoil board to the work piece and then clamp the whole thing into the Carve King. But I'm just working with wood. If you have tighter tolerance requirements you will have to mount a semi-permanent spoil board and level the surface with a planer bit.

[laks]

hope this will help you

millrightcnc.proboards.com/search/results?captcha_id=captcha_search&what_at_least_one=spoilboard&who_only_made_by=0&display_as=0&search=Search