Alex
New Member
Assembling my Route...
Posts: 12
Machine: Power Route
|
Post by Alex on Mar 19, 2018 0:46:34 GMT
Some PHOTOS of my MillRight CNC Route.  |
|
|
|
Post by Derek the Admin on Mar 19, 2018 1:51:07 GMT
Looks smokin hot!
|
|
|
|
Post by Bruce on Mar 20, 2018 4:02:38 GMT
Nice setup.
|
|
|
|
Post by kevin on Apr 1, 2018 5:08:50 GMT
Some PHOTOS of my MillRight CNC Route. That's an awesome looking machine. How are you liking it? |
|
|
|
Post by VGCustomShop on Apr 1, 2018 5:20:14 GMT
Nice! Like that little shelf under for the controller - lean mean routin machine!
|
|
Alex
New Member
Assembling my Route...
Posts: 12
Machine: Power Route
|
Post by Alex on Apr 2, 2018 0:16:07 GMT
Some PHOTOS of my MillRight CNC Route. That's an awesome looking machine. How are you liking it? Love it, I am able to cut plywood and MDF close to speeds I run CaMaster at work so thats saying something. Yesterday I put together the remainder of my vacuum setup so no more dust  CLICK HERE FOR MORE PHOTOS |
|
Alex
New Member
Assembling my Route...
Posts: 12
Machine: Power Route
|
Post by Alex on Apr 2, 2018 0:18:54 GMT
Nice! Like that little shelf under for the controller - lean mean routin machine! Thanks. I would of loved a bigger table but my 2dr civic can only fit 48" by 36" sheet of plywood so the table ended up a little bit on the small side thus I decided to move the controls down to the shelf (prevents from dust getting into the enclosure). |
|
|
|
Post by mtngrown on Apr 2, 2018 0:41:12 GMT
Nice setup! Where did you get the dust boot? I thought I can get away with vacuuming dust while watching my machine, but after testing my power route, I need a vacuum setup like yours.
|
|
|
|
Post by VGCustomShop on Apr 2, 2018 2:47:14 GMT
Nice! Like that little shelf under for the controller - lean mean routin machine! Thanks. I would of loved a bigger table but my 2dr civic can only fit 48" by 36" sheet of plywood so the table ended up a little bit on the small side thus I decided to move the controls down to the shelf (prevents from dust getting into the enclosure). Looking good! Really good dust collection setup. Where did you pick up that dust boot? Congrats on the new machine! |
|
|
|
Post by Bruce on Apr 2, 2018 4:04:37 GMT
Wow quite the setup with the Power Route.
I've been looking at that Dust Deputy cyclone unit. I think it is next on my list, with of course a dust shoe...
|
|
Alex
New Member
Assembling my Route...
Posts: 12
Machine: Power Route
|
Post by Alex on Apr 2, 2018 22:38:03 GMT
Thanks. I would of loved a bigger table but my 2dr civic can only fit 48" by 36" sheet of plywood so the table ended up a little bit on the small side thus I decided to move the controls down to the shelf (prevents from dust getting into the enclosure). Looking good! Really good dust collection setup. Where did you pick up that dust boot? Congrats on the new machine! I got it off of eBay. I tried making one myself but it started to run into a big project and I just couldn't beat the price of already built dust boot thats very easy to remove for bit changes and re-zeroing. |
|
|
|
Post by Derek the Admin on Apr 3, 2018 1:14:46 GMT
Looks good bud.
|
|
Alex
New Member
Assembling my Route...
Posts: 12
Machine: Power Route
|
Post by Alex on Apr 4, 2018 1:25:30 GMT
|
|
|
|
Post by Derek the Admin on Apr 4, 2018 3:34:59 GMT
I don’t know why my Power Route isn’t setup like this is my shop. Nice and clean.
|
|
