|
Post by scotty0245 on Mar 24, 2018 20:57:04 GMT
I just finished putting my carve king together. After powering up and opening ugs. I am unable to jog or move my y axis. I have checked the wheel tightness. when the power is off it turns as the directions say. once power is applied it seems as there is pressure on the turn screws and I can hear the motors trying to turn . but nothing . take the power off and the turn screws move just fine any input would be a great help thanks
|
|
|
Post by Bruce on Mar 25, 2018 3:29:07 GMT
Are you using UGS platform? Are you getting a connection between the PC and the controller when you plugin the USB cable?
|
|
|
Need help
Mar 25, 2018 6:54:34 GMT
via mobile
Post by Derek the Admin on Mar 25, 2018 6:54:34 GMT
Do X and Z move as expected? What voltage reading do you get at the adjustment screw? In the off chance that both Y drivers got blown, have you tried swapping other drivers to those locations (turn off all power, remove USB, and wait at least 60 seconds please).
|
|