rwatz
New Member
Posts: 9
|
Post by rwatz on Apr 7, 2018 20:26:04 GMT
I am try to do this step and i cant get it to run what im i missing? ?? i have download it and i cant find anything to open it with Open Universal G Code Sender, Grbl Panel, or your G Code Sender of choice. We are documenting this with Universal G Code Sender Platform. You can download Universal G Code Sender Platform from this link: winder.github.io/ugs_website/download/. Scroll down and get “UGS Platform” from the bottom, nightly build session. In Windows, unzip the download then run ugsplatform.exe or ugsplatform64.exe from the “bin” folder. (whether you use the “64” version” depends on your system).
|
|
|
I'm Lost
Apr 7, 2018 22:16:42 GMT
via mobile
Post by Derek the Admin on Apr 7, 2018 22:16:42 GMT
We an help you.
Did you right click and unzip or uncompress the folder? If you did then one of the two files in the bin folder should open as long as you have a recent version of Java installed.
|
|
rwatz
New Member
Posts: 9
|
Post by rwatz on Apr 7, 2018 23:37:00 GMT
i got it had to download java 8 to get it to work
|
|
rwatz
New Member
Posts: 9
|
Post by rwatz on Apr 8, 2018 1:02:29 GMT
now that i got the ugs going it will not find COM33 noting is coming up on the port? ? its saying not Serial port found?
|
|
|
Post by Bruce on Apr 8, 2018 5:30:18 GMT
Look here for more information: www.arduino.cc/en/Guide/Windows or millrightcnc.proboards.com/thread/118/windows-7-sp1-uno-driver - Plug in your board and wait for Window to begin it's driver installation process. After a few moments, the process will fail, despite its best efforts. - Type in "Device Manager" in the search bar to find and then open it. - Look under Ports (COM & LPT). Â You should see an open port named "Arduino UNO (COMxx)" - Right click on the "Arduino UNO (COmxx)" port and choose the "Update Driver Software" option. - Next, choose the "Browse my computer for Driver software" option. - Finally, navigate to and select the Uno's driver file, named "ArduinoUNO.inf", located in the "Drivers" folder of the Arduino Software download (not the "FTDI USB Drivers" sub-directory). Windows will finish up the driver installation from there. You may have to manually type "COMxx" into the UGS port selection for the first time. After that it should show up automatically.
|
|
rwatz
New Member
Posts: 9
|
Post by rwatz on Apr 8, 2018 17:13:12 GMT
Hey Bruce I am running windows 10. will the info you gave me work?
|
|
|
I'm Lost
Apr 8, 2018 17:51:23 GMT
via mobile
Post by Bruce on Apr 8, 2018 17:51:23 GMT
It should be the same for Win10.
|
|
rwatz
New Member
Posts: 9
|
Post by rwatz on Apr 8, 2018 20:42:00 GMT
Hey Dereck Can you pm me
|
|