|
Post by Hommer Woods on Jul 1, 2018 16:03:00 GMT
|
|
|
Post by Bruce on Jul 1, 2018 21:53:43 GMT
Very cool video. Could you cut the fancy CNC piece in a couple inch long end stock and then glue it to the longer stock? Maybe with a biscuit joiner?
|
|
|
Post by joebob296 on Jul 1, 2018 22:21:35 GMT
Very cool video. Could you cut the fancy CNC piece in a couple inch long end stock and then glue it to the longer stock? Maybe with a biscuit joiner? You could; probably use two smaller biscuits rather then one big one. I would also joint it after gluing back together.
|
|
|
Post by Hommer Woods on Jul 1, 2018 23:11:45 GMT
Very cool video. Could you cut the fancy CNC piece in a couple inch long end stock and then glue it to the longer stock? Maybe with a biscuit joiner? You could; probably use two smaller biscuits rather then one big one. I would also joint it after gluing back together. Interesting idea. Will give that some thought.
|
|
|
Post by Derek the Admin on Jul 2, 2018 2:31:41 GMT
I love that. I'm going to have to add this to my "to do" list. That list keeps getting longer.
|
|