djh
New Member
Posts: 36
|
Post by djh on Jul 5, 2018 11:49:12 GMT
I am using 2D Contour to carve a design in some plastic. It has a fair amount of detail and I'm assign different depths for the contours to get the effect I am trying to achieve. Needless to say, It is very confusing to remember what contours you have already assigned to a toolpath and the ones that have not been selected. Is there any way to color them differently or an alternative method to show that they have already been assigned to a toolpath. My patience and eyes would appreciate any ideas yall may have.
Thanks,
DJ
|
|
|
Post by Derek the Admin on Jul 5, 2018 13:28:28 GMT
I don't think so. You might try splitting things into a few different contour ops. Then, from the main CAM environment, you can hold control and click each contour op to see which contours have already been selected via the toolpath preview.
|
|
djh
New Member
Posts: 36
|
Post by djh on Jul 5, 2018 16:42:35 GMT
Thank you, I will give that a try.
|
|