|
Post by atroyp on Jul 7, 2018 23:58:25 GMT
I'm curious to see results of laser engraving acrylic... I didn't find much using the search function. Does anyone have examples of what the m3 or carve King laser engraving kit can accomplish on acrylic?
|
|
|
Post by Derek the Admin on Jul 8, 2018 12:22:57 GMT
There are a few examples out there in memory, but I couldn’t quickly find them either.
Here’s a video of Jay at JTECH lasing acrylic with the laser system we sell.
|
|
|
Post by atroyp on Jul 8, 2018 15:17:27 GMT
There are a few examples out there in memory, but I couldn’t quickly find them either. Here’s a video of Jay at JTECH lasing acrylic with the laser system we sell. Link?
|
|
|
Post by Derek the Admin on Jul 8, 2018 16:54:13 GMT
|
|
|
Post by atroyp on Jul 9, 2018 1:25:56 GMT
Thanks. However I'm specifically looking to laser etch/print rather than cut. Would i be able to achieve results similar to below on 2"x4"x3/16" acrilic?
|
|
|
Post by Derek the Admin on Jul 9, 2018 14:09:54 GMT
I don't have any ready examples because we do all our large scale acrylic engraving on our large high wattage (expensive) laser, but you can achieve that effect with the 2.8W as well. It's the same "process" as cutting only it uses less intensity and faster travels and sort of "prints" the image and text on there.
|
|