ashley
New Member
Posts: 2
Machine: Carve King
|
Post by ashley on Jul 20, 2018 2:57:50 GMT
I can't find the answer to this anywhere. I'm brand new to cnc and I need to know how to cut with multiple setups. I am using Fusion 360 and in my cam I need to use two different types of endmills. I made two setups, but how do I make sure when I g-code that both setups go into that code? Does the machine automatically home in between? Do I need to use two different g-codes or just one g-code? If only one g-code how do I get both setups on the code? I hope this makes sense. I really could use the help. thank you! Ashley
|
|
|
Post by Mototech on Jul 20, 2018 21:36:28 GMT
I use one program for each tool. There are ways to create and run one program that stops and waits for you to do a tool change, but I've never looked into it.
You just gotta re-zero your z axis after changing tools.
|
|
|
Post by Mototech on Jul 20, 2018 21:40:21 GMT
Also, I use a program called nc corrector to get an idea of what the tool is going to do. Fusion has the same feature built in, but I like a second opinion. nc-corrector.inf.ua/index_EN.htm
|
|
aclee
New Member
Posts: 12
Location: Mississippi
Machine: Carve King
|
Post by aclee on Jul 21, 2018 4:10:01 GMT
I’m also using Fusion 360 and I’m running a project right now with 4 tool changes. In cam, I have 1 setup with 4 milling operations... 1 for each tool. If I’m not mistaken, if you right click on the “setup” and post process, it writes gcode for all operations in 1 file and you can set the time in between tool changes. I personally right click each milling “operation” and save each file individually. Mainly because I don’t want to be on a time clock to change a tool. When 1 file is complete, I command X0 Y0 and raise the z axis to change the tool and then lower it so I can rezero. Because I haven’t moved my X or Y, I reset them all to zero and then reload the next file.
|
|
|
Post by Bruce on Jul 22, 2018 2:50:47 GMT
Same here, I save each tool path as a separate file and just zero the Z.
|
|