haley
New Member
Posts: 7
|
Post by haley on Jul 24, 2018 21:07:23 GMT
Has anyone used a 1/2" End Mill with their Power Route bundle (DWP618 Router)?
|
|
|
|
Post by joebob296 on Jul 25, 2018 15:29:33 GMT
Yes. No issues with it.
|
|
|
|
Post by Derek the Admin on Jul 25, 2018 16:33:10 GMT
I might make a video of the PR shredding some material with a 1/2" end mill later just for fun.
|
|
haley
New Member
Posts: 7
|
Post by haley on Jul 25, 2018 17:30:29 GMT
What is your typical feedrate, lead-in, plunge, and cut depth for soft plastic with a 1/2" end mill?
|
|
|
|
Post by Derek the Admin on Jul 25, 2018 19:09:20 GMT
From what has worked well for you with a 1/4" end mill, I'd say to drop the RPM by 25% and increase the feed rate 25% and adjust from there.
|
|
|
|
Post by ricko on Jul 26, 2018 20:54:07 GMT
I use it for surfacing hardwoods
|
|
