|
Post by James@fireaxe on Aug 14, 2018 18:11:12 GMT
So while milling my stock down minding my own business, somehow UGS shifted the project down almost 3 inches and it started the mill only half the stock ?? Im assuming its UGS issue as I dont think the machine can think for itself...yet...? Skynet anyone? Anyways is This a known problem? glad I was able to stop it an and can recover by restarting the entire face process. Ive included my UGS screen shot of the process. Weird Attachments:
|
|
|
Post by Derek the Admin on Aug 14, 2018 23:03:50 GMT
There are a few possibilities. The machine could have just lost steps, but if you haven’t heard any strange noises such as a motor stalling or seen that happen before, the. I would imagine that steaming was interrupted momentarily. I would make sure that you don’t have an anything running on the computer that is hogging a bunch of resources. Also, just to rule out anything on the machine side, I would suggest doing a bunch of movement test on the axis that shifting occurred.
|
|